Dispension Kneader for Rubber and Plastic:
The machine is applicable for plasticating and mixing rubber and plastic, as well as applicable for mixing and kneading sticky materials.
Characteristic:
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
The machine is applicable for plasticating and mixing rubber and plastic, as well as applicable for mixing and kneading sticky materials.
Characteristic:
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
Model | X(S)N-10X32 | X(S)N-20X34 | X(S)N-35X30 | X(S)N-55X30 | X(S)N-75X30 | X(S)N-110X30 | ||
Total volume of mixing chamber | L | 25 | 45 | 75 | 125 | 180 | 250 | |
Working volume of mixing chamber | L | 10 | 20 | 35 | 55 | 75 | 110 | |
Driving motor power | KW | 15 | 22 | 55 45 | 75 55 | 110 95 | 185 | |
Tilting motor power | KW | 1.1 | 1.5 | 2.2 | 2.2 | 4 | 4 | |
Tilting angle | ° | 140 | 140 | 140 | 140 | 140 | 140 | |
Rotational speed of the rotor(front/rear) | r/min | 32/23.5 | 34/28 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | |
Pressure of compressed air | MPa | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | |
Capacity of compressed air | M3/min | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | ≥1.0 | ≥1.5 | |
Pressure of cooling water(rubber mixing) | MPa | 0.2~0.4 | 0.2~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | |
Pressure of heating steam(plastics mixing) | MPa | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | |
| L | mm | 2580 | 2630 | 3200 | 3280 | 3330 | 3930 |
Overall dimensions | W | mm | 1300 | 1520 | 1900 | 1930 | 2620 | 3000 |
| H | mm | 2280 | 2550 | 2950 | 3070 | 3340 | 3660 |
Weight | Kg | 3300 | 4500 | 6500 | 7500 | 10500 | 14500 |