Rubber Kneader/Kneader/Dispersion Kneader for Rubber Conveyor Belt

Rubber kneader machcine:The machine is applicable for plasticating and mixing rubber and plastic, as well as applicable for mixing and kneading sticky materials.Characteristic:This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the

Featured Products


Rubber Kneader for Rubber Conveyor Belt/Kneader Machine/Dispersion Kneader
Rubber kneader machcine:
The machine is applicable for plasticating and mixing rubber and plastic, as well as applicable for mixing and kneading sticky materials.

Characteristic:
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
ItemModelX(S)N-55X30
Total volume of mixing chamberL125
Working volume of mixing chamberL55
Driving motor powerKW75 55
Tilting motor powerKW2.2
Tilting angle°140
Rotational speed of the rotor(front/rear)r/min30/24.5
Pressure of compressed airMPa0.6~0.8
Capacity of compressed airM3/min≥1.0
Pressure of cooling water(rubber mixing)MPa0.3~0.4
Pressure of heating steam(plastics mixing)MPa0.5~0.8
 Lmm3280
Overall dimensionsWmm1930
 Hmm3070
WeightKg7500

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours