Sanford, NC – Foot traffic flowed freely through rows of booths at Manufacturing Day, at least until you approached the end of one path near the back. There, three high school students fitted with virtual reality headsets and handheld devices went through what looked like an oddly lethargic dance, occasionally lifting their hands above their heads and then dropping them back down below the waist, occasionally turning their wrist and torsos or sliding side to side.

Around them, a small audience was growing, far enough behind so the three had room to maneuver, but close enough to watch for details, apparently trying to figure out exactly what was happening.

Alex Touchard said it looked a lot different from the inside. The student from Southern Lee High School said that what he was doing under the headset was changing the oil in an automobile. Unplugging the oil drain. Removing the filter. Cleaning the o-ring. And doing everything else that comes with the typical oil change.

It was his first encounter with virtual reality.

And his reaction? “It was actually pretty cool.”

This virtual reality simulation is one of about 300 developed by Transfr, a New York-based company that develops hands-on, simulated training to prepare workers for well-paying jobs. David Wilkinson, the representative from Transfr who carefully positioned each student and gave a quick orientation before setting them loose in virtual reality, said he came to give students a chance to experience careers in the automotive industry.

“They’re very excited,” he said about students going under the goggles. “This is a new way to learn. The goal here is not for this to be a  game; it’s to be a life-changing experience to help them understand job opportunities.”

Hundreds of events are held across North America each fall to celebrate Manufacturing Day, including this one organized by Central Carolina Community College and held on Oct. 7 at the new E. Eugene Moore Manufacturing and Biotech Solutions Center in Sanford. The purpose is to inspire the next generation of skilled workers.

“In America today, we’re trying to get youth interested in careers in manufacturing,” said Jerry Pedley, president and employee owner of Mertek Solutions Inc., a Sanford-based company that designs and builds assembly machines. “Manufacturing is a good way to make a living and we have a lot of that in our area.

“It’s amazing what we have, and we’re here to help support that.”

Pedley has long been an advocate for Manufacturing Day. Before the pandemic, he organized his own plant tour with demonstrations at Mertek, often promoting it together with the CCCC-sponsored Manufacturing Day event. Manufacturing Day returned this year with an added dimension: More industrial vendors are now part of the mix.

Before the doors opened to the public on Friday, Hayden Ireland from Electric Supply and Equipment Co., one of those vendors, spotted Pedley and ran over to greet his friend.

“This is crazy,” Pedley said, pointing to the various company tables being stocked and organized for the full day ahead.

“I came here yesterday and it blew me away,” Ireland replied.

“Me, too. I brought my business cards because I’m going to be calling on customers. The manufacturing opportunities in this building are absolutely amazing.”

While many did check in on suppliers and colleagues throughout the day, the focus remained squarely on students, introducing them broadly to the idea of manufacturing, but also what kinds of specific jobs were available in the region.

That’s what lured Boon Edam from Lillington. After a group of welding students concluded an extended discussion about how the company manufactures its security entrance doors and turnstiles, Lead Fabrication Technician Kenneth McArthur and Continuous Improvement Engineer Starlin Ash took a few moments to answer questions about jobs.

“The common question we get is what positions the company has and what positions are available in manufacturing,” McArthur said after the welding students moved on. “For them, it’s about whether they want to go into this field. They like it. They think it’s very interesting.”

In addition to the virtual reality demonstration, there was another on welding conducted by the college. Caterpillar had two of their locally manufactured compact construction machines on display, which drew plenty of attention. Electric Supply and Equipment Co. was showing a controller, human-machine interface and variable-frequency drive — even decorated with a tiny skeleton as their nod to Halloween approaching.

Electric-car manufacturer VinFast and electronics manufacturer Wolfspeed — two companies that recently announced new massive, multi-billion-dollar production facilities in the area — were on hand to meet with students. And a few companies were going full swag, with promotional items, product samples and one even bringing a wheel to spin for prizes. And out back, there were free hot dogs and water. The hot dogs were compliments of Mertek Solutions and Electrical Supply & Equipment, with water provided by the Sanford Area Growth Alliance.

That atmosphere was exactly what organizers were trying to create.

“What I was hoping for at Manufacturing Day is exactly what we have here,” said Margaret Roberton, CCCC’s Vice President for Workforce Development, looking over the room later in the morning with lunchtime approaching. “We were looking for this level of engagement between the employers that we have in our communities and the students and individuals.

“We’ve seen a lot of middle school students getting introduced to different companies, high school students being intrigued by what is possible and community college students seeing where they’re going to apply the skills they’re learning.

“So, I’m really positive about the way things are going right now.”

Here is a list of companies and CCCC programs in attendance:

Tags: CCCC National Manufacturing Day VinFast Wolfspeed

Please call ahead tonight and tomorrow for dinner or lounge. We are short a few staff members and want to make sure we can accommodate you. Thank you for your understanding! 📞(919) 704-8731 #eatercarolinas #northcarolinaeats #fallseason ... See More See Less

As a Chatham County resident, what's your biggest issue of concern? ... See More See Less

This content isn't available right now

This content isn't available right now

On This Day in History > October 14, 1780: The Battle of Shallow Ford "On October 14, 1780, the Battle of Shallow Ford helps convince British General Charles Cornwallis to abandon his attempts to conquer North Carolina for the year. The battle that saw a large band of Loyalists defeated along the Yadkin River is often overlooked by historians due to the Battle of Kings Mountain that happened only a week before. In the fall of 1780, General Cornwallis entered North Carolina after successfully conquering most of Georgia and South Carolina. North Carolina militia members gathered from around the state and converged on Charlotte where Cornwallis was headquartered. The absence of local patriot militia groups left a vacuum for Loyalists to rise up and wreak havoc in their prospective counties. In Surry County, local Loyalist brothers Gideon and Hezekiah Wright rallied hundreds of Tories who began exacting revenge on the properties of absent patriots and killing those who opposed them. When news spread of the Loyalist uprising, patriots from nearby areas began to mobilize to stop them. General William Lee Davidson sent 50 soldiers from Charlotte. Two companies of militia from Salisbury and 160 men from Montgomery County, Virginia, converged on the area, along with other local patriots who hadn't gone to confront Cornwallis. The Virginia militia, under Major Joseph Cloyd, had come to confront British Colonel Patrick Ferguson's activities in western North Carolina, but when they learned of Ferguson's defeat at the Battle of Kings Mountain, they were diverted to helping stop the Loyalist uprising in Surry County. All of the converging patriots came under the leadership of Major Cloyd. On October 14, a band of 600 Loyalists crossed the Yadkin River, apparently on their way to join General Cornwallis in Charlotte. Cloyd's patriot force, numbering around 350 by this time, located the Loyalists a mile west of Shallow Ford and attacked them, even though they were nearly outnumbered 2 to 1. Colonel Samuel Bryan, who led the Loyalists, was killed early in the fight, causing the rest of his troops to scatter. 14 Loyalists were killed at the Battle of Shallow Ford, while only one patriot was killed, Captain Henry Francis of Virginia. The loss of this large Loyalist force at the Battle of Shallow Ford was one more nail in the coffin of Cornwallis' hopes to conquer North Carolina in 1780. The Battle of Kings Mountain had been the first. The Loyalists in this area were never able to gather such a force again. Cornwallis was forced to withdraw into South Carolina for the winter due to the strong uprising of North Carolina patriots, He tried again the following year, during which his entire army was defeated at Yorktown after withdrawing from North Carolina yet again into Virginia." Revolutionary-War-and-Beyond.com ... See More See Less

Photos from CORA Food Pantry's post ... See More See Less

There is no mask mandate in North Carolina. However..... A man who showed up for jury duty on Monday ended up behind bars after refusing to wear a mask in the courtroom. www.wral.com/mask-dispute-lands-potential-harnett-county-juror-in-jail/20520640/ ... See More See Less

Mask dispute lands potential Harnett County juror in jail

What is wrong with that rules are the rules

Sign up for the FREE Chatham Chatlist Listserv!

See what over 6,100 of your Chatham County friends and neighbors are talking about.

The Chatham Chatlist is a community forum where neighbors discuss what's going on, share experiences, opinions plus give and get advice.

FREE! Enter your email address to subscribe to this newspaper and receive notifications of new posts by email.

Copyright © 2022 Chatham Journal Newspaper. All Rights Reserved. 919-533-4585 The Magazine Basic Theme by bavotasan.com.